Industrial Process

Available with an integrated louver and with an integrated drift eliminator, Opti-Pac 7500 film fill media are designed to replace OEM hanging fill sheets in crossflow cooling tower applications. The

Opti-Pac VAF-19 is a proven low-fouling 3/4" vertical fluted film fill. The module design incorporates two alternating sheet configurations that optimize thermal performance without sacrificing low

Opti-Pac 1200 is a cross-fluted film fill media manufactured from rigid PVC sheets conforming to CTI STD-136 for cooling tower heat-transfer applications. The media is fabricated from corrugated PVC

Opti-Bar splash fill is a product developed by Tower Components, Inc. in 1993, for crossflow and counterflow cooling tower heat-transfer applications. It has been installed in cooling towers servicing

Opti-Lath is Tower Components' latest design of crossflow cooling tower splash fills. Designed specifically to enhance the performance of existing towers, it also provides equal performance in new

Opti-Grid is a direct replacement splash fill for use in crossflow and counterflow towers where dirty water is a concern. Optimum performance in a splash fill is the result of maximizing the number of

The OC-80 is a high efficiency cellular drift eliminator for counter-flow cooling tower applications. The OC-80 is manufactured from rigid, corrugated PVC sheets resistant to UV, rot, fungi, bacteria

Opti-Wave drift eliminators have extruded PVC sine wave profiles 50 mm thick with reinforced upper and lower edges. This provides extra stiffness for long spans with minimum deflection. Spacers secure

OC-150 drift eliminators are designed to remove entrained water droplets from the leaving air stream at minimum pressure losses in both counter flow and cross flow cooling towers. Manufactured from

Opti-Pac 1900 is a cross-fluted film fill media manufactured from rigid PVC sheets conforming to CTI STD-136 for cooling tower heat transfer applications. The media is fabricated from corrugated PVC

Opti-Pac 1900 XF/IL/DE (XF = cross cut / IL = integrated louver / IDE - integrated drift eliminator) is a cross-fluted film fill media manufactured from rigid PVC sheets for cross-flow cooling tower

Opti-Pac 2100 Plus OF is a higher performing, low-fouling film fill media with vertically offset flutes manufactured from rigid corrugated PVC sheets for counterflow cooling tower heat-transfer

Opti-Pac 3000 is a cross-fluted film fill media manufactured from rigid PVC sheets conforming to CTI STD-136 for cooling tower heat-transfer applications. The media is fabricated from corrugated PVC