Opti-Wave drift eliminators have extruded PVC sine wave profiles 50 mm thick with reinforced upper and lower edges. This provides extra stiffness for long spans with minimum deflection. Spacers secure
Drift Eliminators
In every cooling tower, there is evaporative water loss to the environment. When liquid water becomes entrained in the leaving air stream, however, drift eliminators are used to minimize the amount of water carried out of the cooling tower with the exhaust air. These water droplets carry the same concentration of impurities as are typically found in cooling towers. Drift eliminators are designed to prevent the droplets and mist from escaping by capturing the droplets and sending them back into the tower. Efficient drift eliminators will keep drift losses to less than .001% of the recirculating water flow rate
- Primary Product Image
- Primary Product Image
The OC-80 is a high efficiency cellular drift eliminator for counter-flow cooling tower applications. The OC-80 is manufactured from rigid, corrugated PVC sheets resistant to UV, rot, fungi, bacteria - Primary Product Image
OC-150 drift eliminators are designed to remove entrained water droplets from the leaving air stream at minimum pressure losses in both counter flow and cross flow cooling towers. Manufactured from